Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
PP C PP C PP 10T PP 20T PP 30T PP 40T
PP C High Impact PP High Impact PP 10 Talco High Impact PP 20 Talco High Impact
PP C High MFI PP High MFI PP 10 Talc High MFI PP 20 Talc High MFI
PP GF PP 10 GF PP 20 GF PP 30 GF PP 40 GF
PP LGF PP 10 LGF PP 20 LGF PP 30 LGF PP 40 LGF
PE PE LD Extrusion PE LD Injection PE HD Injection PE HD Extrusion
PS PS Crystal PS MI PS HI
ABS ABS Medium Impact ABS High Impact ABS/PC High Impact
PC PC PC/ABS
ASA ASA
SAN SAN
PA6 PA6 PA6 20GF PA6 30GF
PA66 PA66 PA66 20GF PA66 30GF
POM POM
PBT PBT PBT 20GF
Thermoplastic Rubber EPDM TPV TPE TPS TPU

POM | Polyoxymethylene, Acetal or Polyacetal

POM (Polyoxymethylene, Acetal or Polyacetal) is supplied in two basic forms: homo and co-polymers. Co-polymers are thermally more stable. Non-reinforced homopolymers (POM-H) are the most rigid and resistant thermoplastics, and have excellent dimensional stability. The become fragile at temperatures below -40ºC.

They have a high degree of superficial hardness and a low friction co-efficient, giving them good slipping and wear-resistance behaviour, making them ideal for use in gearboxes.

See more

Permeability to gases and vapours and organic substances is low. Whether homopolymers or co-polymers, they are attacked by strong acids (pH 4) and oxidizing agents, neither are soluble and they rarely swell in all kinds of organic solvents in use. They resist oils and are resistant to aggressive fuels such as diesel and petrol up to a temperature of 100ºC.

Not stabilised they are attacked by UV rays, which is why it is advisable to use them stabilised for UV or charged with carbon black.

Homopolymers have greater crystalline properties, providing better resistance to impact and making them slightly more rigid and hard, whilst the co-polymers give better comfort and ease in processing. POM provides good resistance against bending under continuous cyclic loads.

Uses of POM | Polyoxymethylene, Acetal or Polyacetal

Gearwheels
Connections
Axles

Characteristics

  • Injection

Recyclable Vs Reusable

Colors

Ask for more information
Black
Black
In our plastic recycling plant we have the machinery and capacity to produce POM | Polyoxymethylene, Acetal or Polyacetal in different colors and with different characteristics of flow and impact and / or loads.

Packaging (for other measurements and weight consult)

Octabin

Weight Kg High m. Width m. Deep
A 1.000 2,30 1,20 1,20
B 800 1,85 1,20 1,20
C 500 1,60 1,20 1,20

Big Bag

Weight Kg High m. Width m. Deep
A 1.100 2,00 1,20 1,20
B 800 1,70 1,20 1,20
C 500 1,50 1,20 1,20

Tanker truck

Weight
20 tn.
25 tn.
30 tn.

Request more information